Multi-Rack Cold Finger CF15 - the 'Professional' in the Lab
Faster, easier and safer to measure wax in crude oil
The Multi-Rack Cold Finger CF15 is the professional among our Cold Finger product family. It is the new standard in leading oil laboratories for measuring wax and paraffin deposits as well as inhibitor separation.
The revolutionised design with a modern drying bath for more working safety and individually removable samples in drawers for easier handling are part of its success.
The Cold Finger CF15 is a compact, easy-to-use measuring device. It achieves reproducible results by providing the same conditions for all 15 measuring stations for accurate analysis. The modular design as well as expandable temperature and pressure ranges allow for maximum flexibility.
All important features of the CF15
- The new standard for Cold Finger Measurements
- Modern dry bath for greater safety
- Individually removable samples for easy handling
- Shorter measuring times thanks to 15 parallel tests
- Flexible with expandable temperature and pressure range
Application Areas for Cold Finger CF15
Examine wax and paraffin deposits
Determine WAT (wax appearance temperature)
Determine WPT (wax precipitation temperature)
Develop wax inhibitors
Optimize inhibitor concentration
Quality control
Short story Cold Finger CF15
New standards with proven cold finger measuring method
The ‘Professional’ of our Cold Finger product family impresses with its precise finger and sample positioning. The intelligent design achieves reproducible results with high measuring accuracy thanks to the high level of operating safety.
The samples are protected from environmental influences in the closed measuring chamber. The wax deposits can be re-melted after the test. This means that the samples remain completely unchanged and can be reused.
The user-friendly operation, from simple preparation and quick execution to easy cleaning and supported software evaluation completing the concept.
IN USE WORLDWIDE
Used by Leading Labs
The Measurement Procedure
Up to three drawers, each with 5 measuring positions, are housed in a sturdy aluminium frame. The drawers are easy to pull out.
Place the filled sample vials in the measuring stations and push the cooling finger with sleeve into the sample. Set the test conditions on the device itself or via the software and carry out the experiment.
At the end of the test, pull the drawer out again. Push the cooling finger upwards into the holder. Remove the sleeve with the wax deposits from the finger. This is easy to do, as there is a knurling on the upper, dry edge of the sleeve for this purpose. Place the sleeve on the scales and save the weight of the wax deposits using the computer.
Online Demo for Cold Finger CF15
During the product demonstration, you will gain many insights into how it works. You can follow the measuring process live and then discuss your questions with our experts.
Application strengths and customer benefits
6 advantages of the Multi-Rack Cold Finger
Save time every day with simple preparation
Daily user-friendly test procedure including simple cleaning.
The simple operation during preparation, execution, evaluation and cleaning is impressive. The software with tare function and the measuring sleeves with wax slip protection make weighing easier. The surfaces as well as the easily removable measuring sleeves and sample tubes are easy to clean.
Reduce project times - Achieve results faster
Shorter measuring times thanks to parallel tests and a closed system
Flexible measurement: The temperature and stirring speed can be set individually for each extract with five measuring stations. This enables parallel testing of different inhibitors and inhibitor concentrations. This significantly reduces test times. The small sample quantity and temperature control in a closed system also contribute to this.
You can trust the results
Highest accuracy through precise temperature measurement close to the sample
The wax deposit temperature on the cooling finger can be measured accurately and controlled precisely. This is because the temperature measurement takes place directly under the surface of the cold finger, i.e. exactly where the wax deposit takes place. As a result, the cold finger achieves a significantly higher measuring accuracy compared to other concepts in which the finger temperature is only measured in the return flow.
Comparable results thanks to high operating reliability
Safe operation leads to reproducible results and high comparability
The high-quality device impresses with its precise finger and sample positioning. The cold finger achieves the same conditions for all measuring stations. This innovative design achieves reproducible results with high measuring accuracy thanks to its high operating safety.
You save sample material
Small and reusable sample quantity
The Cold Finger requires only 60 ml of sample. The wax deposits can be re-melted after the test thanks to the removable measuring sleeve. Condensation and evaporation of the sample is prevented in the sealed measuring chamber. This means that the samples remain completely unchanged and can be reused.
Expandable if your requirements increase
Modular system with up to 15 measuring stations
The basic device with five measuring stations can be extended to up to 15 measuring stations. Each pull-out with five measuring stations can be equipped differently. Different temperature ranges for samples and fingers as well as measurements under pressure are possible.
Selection guide
Are you still wondering whether the Multi-Rack Cold Finger CF15 is best suited to your needs? Then the answers to the questions will help you get there.
Is the Multi-Rack Cold Finger CF15 right for me?
- Are cold finger measurements part of your daily lab routine?
- Do you need to carry out a large number of cold finger measurements on a regular basis?
- Would you like to shorten the lead time?
- Would you like to measure more easily and reliably?
- Do you want a laboratory device that measures with state-of-the-art technology?
- Should the results be comparable with other laboratories?
- Do you want to measure like the leading laboratories?
Have you answered “yes” several times? Then we would be happy to advise you in more detail.
The most important facts at a glance
| Number of Fingers | 5, 10 or 15 |
| Temperature Range Sample |
+30 .. +120 °C (+86 .. +248 °F) -10 .. +80 °C (+14 .. +176 °F) - optionally |
| Temperature Range Cold Finger |
-5 .. +65 °C (+23 .. +149 °F) -20 °C (-4 °F) - optionally |
| Sample Volume | 60 .. 80 ml per measuring place |
| Pressure Range | 172 bar (2,500 psi) - optionally |
Data sheet Multi-Rack Cold Finger CF15
In the product data sheet you will find the exact specification as well as many data and options to help you decide on the Multi-Rack Cold Finger CF15.
WHY PSL?
We set new laboratory standards with our devices
PSL stands for reliability, quality and innovation. We are proud that the Big Five in the industry are among our satisfied customers.
We have been developing, manufacturing and selling innovative laboratory instruments specifically for Flow Assurance for 25 years, setting new standards in the laboratory for professionals. We have been awarded innovation prizes for this. Our export quota of 90 % earned us the Export Oscar of Northern Germany.
We have been developing, manufacturing and selling innovative laboratory instruments specifically for Flow Assurance for 25 years, setting new standards in the laboratory for professionals. We have been awarded innovation prizes for this. Our export quota of 90 % earned us the Export Oscar of Northern Germany.
WHAT WILL BE YOUR BENEFIT?
Reliable, high-quality instruments for your success
SAVE TIME IN EVERYDAY LAB WORK
with automated test cycles, cleaning procedures and easy-to-clean parts.
EASY TO USE
with a user-friendly, high-quality design for simple, correct and safe handling.
LONG LIFETIME MADE IN GERMANY
thanks to the sophisticated and robust design as well as the high-quality materials and manufacturing.
TRUSTED SERVICE - WORLDWIDE
with our online support, maintenance contracts and on-site service. We guarantee 20 years of repair service.
MEASURE LIKE INDUSTRY LEADERS
With innovative and advanced instruments, you can measure future-proof like the leading laboratories.
PLEASURE TO MEASURE
Our instruments make work a pleasure. They were developed together with the users.
I would like to know more about the instrument
PSL is the Cold Finger Specialist
You can choose between 4 cold finger models.
You may also be interested in these products
Wax Flow Loop WL
The fully automated Wax Flow Loop is a compact laboratory system for investigating the precipitation and deposition of waxes, paraffins and asphaltenes in pipelines.
Pour Point Tester PPT
The portable pour point tester measures the pour point (no flow point) of oils and oil products in accordance with ASTM D 5985, making it 30 times more accurate than devices that comply with ATSM D97.
Flocculation Tester FT5
The automatic flocculation tester measures precipitation and crystallization of asphaltenes in very dark, undiluted crude oils and oil products up to 700 bar and 200 °C.